This is an exterior steel reproduction sunvisor of superior quality for Bel Air hardtops. It comes with with mounting hardware and instructions. Non-adjustable. Fits 53-54 Har... For 1953 1954 Chevrolet Cars

This is an exterior steel reproduction sunvisor. It comes with mounting hardware and instructions. Black primered with an EDP coating. These are great for reducing windshield ... For 1953 1954 Chevrolet Cars

This is a die stamped spare tire well original fit 49-54, modify for 41-48 Made in the USA Outside flange length: 29-3/4 inches, inside 28-1/8 inches (floor opening) Outside f... For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

This is a cargo floorboard area for a Sedan Delivery only. Made in the USA This item is oversized, extra shipping charges will apply. For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

These floor support brackets are for the Sedan Delivery. The brackets replace the floor supports that hold up the wooden panels behind the seat. 18 Gage steel. Made in the USA... For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

This is a superior quality, die stamped 18 gage steel, left inner front rocker repair panel for 2 door and 4 door. It closes off the area from the bottom of the rocker to the ... For 1953 1954 Chevrolet Cars

This is a superior quality, die stamped 18 gage steel, right inner front rocker repair panel for 2 door and 4 door. It closes off the area from the bottom of the rocker to the... For 1953 1954 Chevrolet Cars

This is a superior quality, 18 gage die stamped rocker repair panel for the lower right front, inner quarter panel. Made in the USA For 1953 1954 Chevrolet Cars

This is a superior quality, 18 gage die stamped rocker repair panel for the lower left front, inner quarter panel. Made in the USA This item is oversized, extra shipping charg... For 1953 1954 Chevrolet Cars

These are the rear floorboards left and right with the tunnel. For 1953 1954 Chevrolet Cars

This is the repair panel for the lower front of rear left fender. (fits 2 door models only) For 1953 1954 Chevrolet Cars

his is the repair panel for the lower front of rear right fender. (fits 2 door models only) For 1953 1954 Chevrolet Cars

This trunk floor kit is constructed of 18 gage steel fabricated and die stamped. The main flat area's are fabricated to accurately fit the perimeter of the trunk floor area, w... For 1953 1954 Chevrolet Cars

This is the panel below the trunk lid for the left side. Fits all except sedan delivery and station wagon. The overall length is 36 inches x 2 inches (at narrow end) x 3-7/8 i... For 1953 1954 Chevrolet Cars

This is the panel below the trunk lid for the right side. Fits all except sedan delivery and station wagon. The overall length is 36 inches x 2 inches (at narrow end) x 3-7/8 ... For 1953 1954 Chevrolet Cars

This is a full floor pan with braces. Exquisite detail went into this full floor. The floor braces are already attached. It's one piece from toe board back to the trunk floor.... For 1953 1954 Chevrolet Cars

This is a complete trunk floor pan. Exquisite detail went into this piece. The braces are already attached. This item is oversized, extra shipping charges will apply. For 1953 1954 Chevrolet Cars

This is a inner fender brace for the outer skin of the lower front left fender. This is precision die-stamped from 18 gage steel. Made in the USA For 1953 1954 Chevrolet Cars

This is a inner fender brace for the outer skin of the lower front right fender. This is precision die-stamped from 18 gage steel. Made in the USA For 1953 1954 Chevrolet Cars

This is the front drivers side toe board. It extends from the vertical part of the firewall downward towards the main flat part of the front floor. This is a high quality piec... For 1953 1954 Chevrolet Cars

This is the front right toe board. It extends from the vertical part of the firewall downward towards the main flat part of the front floor. This is a HIGH QUALITY piece, cons... For 1953 1954 Chevrolet Cars

This is a superior quality die stamped left front floorboard repair panel. For 1953 1954 Chevrolet Cars

This is a superior quality die stamped floorboard repair panel for the right front. Replaces from the bottom of the toe board rearward to about the back of the front seat. Mad... For 1953 1954 Chevrolet Cars

This is a superior quality die stamped floorboard repair panel for the left front. Replaces from the bottom of the toe board rearward to about the back of the front seat. Made... For 1953 1954 Chevrolet Cars

This is a superior quality die stamped right rear floorboard repair panel. Rear right. Replaces a few inches forward of the front seat rearward to just under the rear seat. Ma... For 1953 1954 Chevrolet Cars

This is a superior quality die stamped left rear floorboard repair panel. Rear left. Replaces a few inches forward of the front seat rearward to just under the rear seat. Made... For 1953 1954 Chevrolet Cars

This is a right rear floorboard repair panel. For 1953 1954 Chevrolet Cars

This is a left rear floorboard repair panel. For 1953 1954 Chevrolet Cars

This is a second row (middle) floor brace. It's one piece construction as was originally installed on your car. Primered and ready for installation. This item is oversized, ex... For 1953 1954 Chevrolet Cars

This is a first row (front) floor brace. It's one piece construction as was originally installed on your car. Primered and ready for installation. This item is oversized, extr... For 1953 1954 Chevrolet Cars

This is a third row (rear) floor brace. It's one piece construction as was originally installed on your car. Primered and ready for installation. This item is oversized, extra... For 1953 1954 Chevrolet Cars

This is the front floor brace for the left side that attaches to the cowl. For 1953 1954 Chevrolet Cars

This is the front floor brace for the right side that attaches to the cowl. For 1953 1954 Chevrolet Cars

The hardtop/convertible cars have a special reinforcement floor brace near the rear door post consisting of a series of braces and reinforcement brackets and connector plates ... For 1953 1954 Cars

This is the second row (center left) of four rows of floor bracing for a 1953-54 Chevrolet car. It's a very nice reproduction to repair the typically rusted outer floor brace.... For 1953 1954 Chevrolet Cars

This is the second row (center right) of four rows of floor bracing for a 1953-54 Chevrolet car. It's a very nice reproduction to repair the typically rusted outer floor brace... For 1953 1954 Chevrolet Cars

The hardtop and convertible cars have a special 4th row floor brace near the rear door post consisting of a series of braces and reinforcement brackets and connector plates th... For 1949 1950 1951 1952 1953 1954 Cars

This is the first row (front right) of four rows of floor bracing for a 1953-54 Chevrolet car. It's a very nice reproduction to repair the typically rusted outer floor brace. ... For 1953 1954 Chevrolet Cars

This is the first row (front left) of four rows of floor bracing for a 1953-54 Chevrolet car. It's a very nice reproduction to repair the typically rusted outer floor brace. M... For 1953 1954 Chevrolet Cars

This is the left side of the third row of four rows of floor bracing on a 1953-54 Chevrolet car. A very nice reproduction to repair the typically rusted outer floor brace. Mad... For 1953 1954 Chevrolet Cars

This is the right side of the third row of four rows of floor bracing on a 1953-54 Chevrolet car. A very nice reproduction to repair the typically rusted outer floor brace. Ma... For 1953 1954 Chevrolet Cars

This is the left side of the fourth row of four rows of floor bracing on a 1953-54 Chevrolet car. A very nice reproduction to repair the typically rusted outer floor brace. If... For 1953 1954 Chevrolet Cars

This is the right side of the fourth row of four rows of floor bracing on a 1953-54 Chevrolet car. A very nice reproduction to repair the typically rusted outer floor brace. I... For 1953 1954 Chevrolet Cars

This is the left side seat bracing that welds to the floor pan. For 1953 1954 Chevrolet Cars

This is the right side seat bracing that welds to the floor pan. For 1953 1954 Chevrolet Cars

The hardtop and convertible cars have a special set of reinforcement brackets near the rear door post consisting of a series of braces, this door post reinforcement plate is p... For 1953 1954 Cars

The hardtop/convertible cars have a special set of reinforcement brackets near the rear door post consisting of a series of braces, this door post reinforcement plate is part ... For 1953 1954 Cars

This is the repair panel for the lower rear of the left front fender. Made in the USA For 1953 1954 Chevrolet Cars

This is a repair panel for the lower section of the front right front fender. Made in the USA For 1953 1954 Chevrolet Cars

This is an inner and outer repair panel for the door bottom. Fits 2 door only, right side (2 pieces). 2 door sedan, hardtop and convertibles. Made in the USA This item is over... For 1953 1954 Chevrolet Cars

This is an inner and outer repair panel for the door bottom. Fits 2 door only, left side (2 pieces). 2 door sedan, hardtop and convertibles. Made in the USA This item is overs... For 1953 1954 Chevrolet Cars

This is a die stamped quarter repair panel for the right side of a 2 door from the door post to the center of the wheel well. Made in the USA For 1953 1954 Chevrolet Cars

This is a die stamped quarter repair panel for the left side of a 2 door from the door post to the center of the wheel well. Made in the USA For 1953 1954 Chevrolet Cars

This is a die stamped quarter repair panel for the left lower rear quarter. Made in the USA For 1953 1954 Chevrolet Cars

This right side inner rear quarter panel is a die-stamped panel that connects the bottom of the outer rear quarter panel with the inner trunk floor just behind the rear wheel ... For 1953 1954 Chevrolet Cars

This left side inner rear quarter panel is a die-stamped panel that connects the bottom of the outer rear quarter panel with the inner trunk floor just behind the rear wheel t... For 1953 1954 Chevrolet Cars

This is a die stamped quarter repair panel for the right lower rear quarter. Made in the USA For 1953 1954 Chevrolet Cars

This is the passengers side outer rocker repair panel. This will fit all two door bodies. You can also use this on the front of the four door car. Made in the USA For 1953 1954 Chevrolet Cars

This is a left side outer rocker repair panel. This will fit all two door bodies. You can also use this on the front of the four door car. Made in the USA For 1953 1954 Chevrolet Cars

This is an inner right rocker repair panel for a 2 door. It measures 69-1/2 inches in length. This item is oversized, extra shipping charges will apply. For 1953 1954 Chevrolet Cars

This is an inner left rocker repair panel for a 2 door. It measures 69-1/2 inches in length. This item is oversized, extra shipping charges will apply. For 1953 1954 Chevrolet Cars

This is a much needed part when repairing the trunk floor area in a 1953-54 Chevrolet car. This brace is located under rear of the trunk floor. This item is oversized, extra s... For 1953 1954 Chevrolet Cars

This is a trunk floor extension panel. Made in the USA This item is oversized, extra shipping charges will apply. For 1953 1954 Chevrolet Cars

This is the panel below the trunk lid on a 53-54 (except Sedan Delivery and Station Wagon). Made in the USA This item is oversized, extra shipping charges will apply. For 1953 1954 Chevrolet Cars

This is the rear splash apron, except for Station Wagon and Sedan Delivery Made in the USA This item is oversized, extra shipping charges will apply. For 1953 1954 Cars

This is a center divider bracket set for a Fulton exterior visor. They are stainless steel construction with an anti rattle rubber insert. (2pcs) For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

These are replacement visor mounting brackets for 1953-54 Sedan style visor (our part # 986674). Not recommended for original visors, only after market reproductions. Paired a... For 1953 1954 Chevrolet Cars