This is a rear fender brace that measures 11 7/8 inches from center to center of the mounting holes. For 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks

This a rear fender brace is for 2 inch widened fenders. The length is 14-7/8 inches center to center of the mounting holes. For 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks

These are correct for 1942-1946 but works well on 1940-1941. Fits under the top crown of the fender. For 1940 1941 1942 1944 1945 1946 Chevrolet Cars and Trucks

These are the braces for the front fender. Measures 10-1/2 inches center to center of the holes. For 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks

This a fender brace for the rear on a 3/4 ton truck. For 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks

This is a fender brace to go from upper inside ledge of fender to firewall and sits in the engine compartment. For 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks

Fender Brace Front, Stainless steel for your 1/2 Ton pickup. For 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks

Fender Brace Rear, polished stainless steel, fits 1/2 Ton pickups. Including mounting hardware. Braces mount at rear of rear fender to frame. Made in the USA. For 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks

This is a polished stainless fender brace for the rear of a 3/4 ton truck. It's 17 3/4 inches center to center. For 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks

This is a set of stainless steel front and rear fender braces. A 4 piece set. For 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks

This fender brace is for the rear and made for 2 inch wider than stock fenders. For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

This fender brace is for the rear and made for 2 inch widened fenders. Measures 15-1/4" long. For 1937 Chevrolet Cars

This fender brace is for the rear and made for 2 inch widened fenders. For 1938 Chevrolet Cars

This brace is for the rear fender on cars with 2 inch widened fenders. For 1940 Chevrolet Cars

This is the brace for the rear fender. It bolts to the rear fender. If you don't want your fender moving around as you travel down the road then you need these. They will prev... For 1939 Chevrolet Cars

This is the brace for the front fender. It bolts to the front fender. If you don't want your fender moving around as you travel down the road then you need these. They will pr... For 1939 Chevrolet Cars

This fender brace is for the rear and made for 2 inch widened fenders. For 1939 Chevrolet Cars

This is the brace for the front fender. It bolts to the front fender. If you don't want your fender moving around as you travel down the road then you need these. They will pr... For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

This is the brace for the rear fender. It bolts to the rear fender. If you don't want your fender moving around as you travel down the road then you need these. They will prev... For 1938 Chevrolet Cars

This is the brace for the rear fender. It bolts to the rear fender. If you don't want your fender moving around as you travel down the road then you need these. They will prev... For 1937 Chevrolet Cars

This is the brace for the front fender. It bolts to the front fender. If you don't want your fender moving around as you travel down the road then you need these. They will pr... For 1940 Chevrolet Cars

This is the brace for the rear fender. It bolts to the rear fender. If you don't want your fender moving around as you travel down the road then you need these. They will prev... For 1940 Chevrolet Cars

This is the brace for the rear fender. If you don't want your fender moving around as you travel down the road then you need these. They will prevent premature cracking of the... For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

This is a inner fender brace for the outer skin of the lower front left fender. This is precision die-stamped from 18 gage steel. Made in the USA For 1953 1954 Chevrolet Cars

This is a inner fender brace for the outer skin of the lower front right fender. This is precision die-stamped from 18 gage steel. Made in the USA For 1953 1954 Chevrolet Cars

This is a inner fender brace for the outer skin of the lower front left fender. This is precision die-stamped from 18 gage steel. Made in the USA For 1949 1950 1951 1952 Chevrolet Cars

This is a inner fender brace for the outer skin of the lower front right fender. This is precision die-stamped from 18 gage steel. Made in the USA For 1949 1950 1951 1952 Chevrolet Cars

This rear fender brace is 12" long. Made of stainless steel and comes with the required bolts and nuts. For 1937 Chevrolet Cars