This is a pair of coil springs that fit all IFS cars from 1939-52 except for Powerglide equipped cars and 1949-52 convertibles. For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 Chevrolet Cars

This is a pair of coil springs that will fit all 1949-1954 cars with powerglide, 1949-1952 convertible and all of 1953-1954 Chevrolet cars. For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

Corvette suspension and brakes - The ultimate! C5 Corvette aluminum suspension, custom power rack and pinion (rotates to clear mounts and headers), disc brakes, V8 motor mount... For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

C5 Corvette aluminum suspension, custom power rack and pinion (rotates to clear steering and headers), disc brakes, V8 motor mounts included, LS adapters available. INSTALL IN... For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

These are the lower shock mounts on the lower control arm for the C5 Corvette suspension conversion. For All Chevrolet Cars

This is the steering rack for our bolt-in C5 Corvette front suspension conversion. Our steering rack was designed to keep correct suspension geometry and eliminate bump steer.... For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Cars and Trucks

This is a C5 Corvette suspension conversion. Fits 1949-54 Chevy Car and Sedan Delivery. This is a bolt on front crossmember that uses your C5 suspension components or we also ... For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

This is a C5 Corvette suspension conversion. Fits 1939-48 Chevy Car and Sedan Delivery (except straight axle cars) This is a bolt on front crossmember that uses your C5 suspen... For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

Don't have a donor C5 Corvette? We've put together all the components for a front C5 conversion in a kit. Complete with factory nuts/bolts to put it together. Does not include... For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

Suspension kit. Heidt's weld-in tubular A-arms without crossmember. Includes plain tubular upper and lower, full width A-arms. All packages include: 11" five lug rotors; ... For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Cars and Trucks

Suspension kit. Heidt's Mustang II weld-in, tubular A-arms with crossmember. Includes plain tubular upper and lower full width A-arms. All packages include: 11" five lug ... For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Cars and Trucks

This is a 2600 pound airbag. It has 1/2 inch ports, 2 top holes for mounting that are 2-3/4 inches center-to-center and 1 bottom hole. Built specifically for automotive suspen... For All Cars and Trucks

DeNominator II 2500lb airbag, 600psi. 1/2" ports, 2 top holes (1-3/4" center-to-center) and 1 bottom hole. Built specifically for automotive suspensions rather than ... For All Cars and Trucks

The DeNominator II is a 2600 pound airbag, 500 psi. 1/2" ports, 2 top holes for mounting that are 2-3/4 inches center-to-center and 1 bottom hole. Built specifically for ... For All Cars and Trucks

These are a non-adjustable built-in shock and bag. 2500lb 6-1/4" dia. Built to your specifications. Just provide us with the following information: Air shock length, open... For All Cars and Trucks

These are a 10 position adjustable built-in shock and bag. 2500lb. 6-1/4 inches diameter. Built to your specifications. Just give us the following information: Air shock lengt... For All Cars and Trucks

This is our deluxe front end rebuild kit for knee action front ends. Rebuild your steering and suspension system to put new car handling back in your car. Deluxe kit includes:... For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

This is our deluxe front end rebuild kit. Rebuild your steering and suspension system to put new car handling back in your car. Deluxe kit includes: 4 Outer Pin Kits Inner Sha... For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

Urethane Bushing Kit for Corvette Front Suspension. For All Chevrolet Cars and Trucks

Chevy Corvette front and rear suspension bushing kit that lets you upgrade worn and crumbling rubber bushings that dampen vibrations at mounting points for front upper and low... For All Chevrolet Cars and Trucks

This is a Heidt's weld-in IFS front suspension kit. It's a Superide II for 1937-39 Chevy car. Contents of kit: - TIG welded main crossmember for maximum strength and great loo... For 1937 1938 1939 Chevrolet Cars

This is a Heidt's weld-in IFS front suspension kit. It's a Superide II for 1940-48 Chevy car. Contents of kit: - TIG welded main crossmember for maximum strength and great loo... For 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

Bracket kit. for use with heidts tubular full lower a-arms For All Cars and Trucks

This is a Heidts brand front sway bar for Mustang Ii suspension kit in a 1949-54 Chevrolet car. For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

This is a Heidts brand front sway bar for Mustang Ii suspension kit in a 1940-48 Chevrolet car. For 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

Spindle. Mustang II. Stock height. 1045 heat-treated alloy steel. Uses all stock rotors, bearings, calipers, etc. making it easy to install. Retains stock factory geometry. Al... For All Cars and Trucks

2" dropped spindle for Mustang II independent front suspensions. Easily lower the height of your car or truck while keeping the suspension geometry in place for a smooth ... For All Cars and Trucks

This 5/8 inch right hand straight angled adjuster with 1/2 inch sleeve is for GM cars only. Polished (Show finish) for suspension A-arms. For All Chevrolet Cars and Trucks

This 5/8 inch right hand multi angle adjuster with 1/2 inch sleeve is for GM cars only. Polished (Show finish) for suspension A-arms. For All Chevrolet Cars and Trucks

This is the nut, washer and lock pin for Mustang II / Pinto spindles (does 2 spindles). For All Cars

Sway Bar-Front - Chevy For 1949 1950 Cars

This front sway bar improve the handling of your top heavy Chevy. Use with Chassis Engineering IFS kit (pt #IF-7480EW). Includes bushings and mounts (for economy A-Arms). If u... For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

This front sway bar improve the handling of your top heavy Chevy. Use with Chassis Engineering IFS kit (pt # IF-7480EW). Includes bushings and mounts (for economy A-Arms). If ... For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

This front sway bar improve the handling of your top heavy Chevy. Use with Chassis Engineering IFS kit (pt # IF-7480EW). Includes bushings and mounts (for economy A-Arms). If ... For 1940 Chevrolet Cars

This sway bar fits Chassis Engineering and Mustang II/ Pinto IFS kits. 1937-39 Chevrolet car. For best results use front and rear sway bars together. Includes all linkage and ... For 1937 1938 1939 Chevrolet Cars

This is a grease fitting that is 1/4 inch x 28 taper thread with a 90 degree inlet. For All Chevrolet Cars and Trucks

This is a grease fitting that is 1/8 inch national pipe with a straight inlet. For All Chevrolet Cars and Trucks

This is the upper outer link pin with seals. It fits 1949-54 passenger cars and 1953-62 Corvette. For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

This is the lower outer link pin with seals. It fits 1939-54 passenger cars and 1953-62 Corvette. For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

This is the upper outer link pin with seals that fits 1939-48 cars. For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

These are the link pin seals for the lower outer on 1939-54 passenger cars and 1953-62 Corvette. (4 pieces) The outside diameter is 1-1/8 inches. For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

These are the seals for the upper outer link pins. (4 pieces) For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

These are the link pin seals for the upper outer on 1949-54 passenger cars and 1953-62 Corvette (4 pieces) For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

This is the inner shaft for the upper A-frame on 1949-54 cars and 1953-62 Corvette. For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

This is the inner shaft for the lower A-frame on 1949-54 cars and 1953-62 Corvette. For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

This is the lower inner shaft for the left A-frame with seals. (driver's side) For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

This is the lower inner shaft for the right A-frame with seals. (passenger's side) For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

These are the seals for the inner shaft on the upper or lower A-arms for 1939-54 passenger cars and 1953-62 Corvette (4 pieces) For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

These are the rubber bump stops for the front I beam axle that prevent it form bottoming out. (2 pieces) For 1936 1937 1938 Chevrolet Cars

These are the rubber bumpers or bumpstops for the front axle. They fit models KB and JB. For 1939 1940 Chevrolet Cars

These are the rubber bumpers or bumpstops for the lower A-frame that are a snap-in type. (2 pieces included) For 1939 1940 1941 Chevrolet Cars

These are the rubber bumpers or bumpstops for the upper A-frame. They have 1-3/4 inch overall height 1-1/2" diameter. Also fits 1953-56 Corvette (2 pieces included) For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

These are the rubber bumpers or bumpstops for the lower A-frame that are a bolt-in type. 2" high x 1.75" dia. and rubber height 1-3/4". (2 pieces included) For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

These are the rubber bumpers or bumpstops for the lower A-frame that are a bolt-in type. 2-3/4 inches in height and a 2 inch diameter. 1/2 inch thread length. Also fit 1953-62... For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

These are the rubber bumpers or bumpstops for the upper A-arms. They have an overall height of 2 inches 1.5 inch diameter. Also fit 1953-56 Corvette (2 pieces included). For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

This is a kingpin kit for straight axle cars (except models CC, DC, EC and FC) king pin .732" dia. length 5-3/16" busing OD. .860" For 1929 1930 1931 1932 1933 1934 1935 1936 Chevrolet Cars

This is a kingpin set for a 1937-40 straight axle car.. Kingpin size = 5.19 inches in length x .732 inch outside diameter. Bushing = .919 inch outside diameter. For 1937 1938 1939 1940 Chevrolet Cars

This is a kingpin set for knee action shock suspensions 1939-54 and 53-62 Corvette. Pins are .866" OD x 5.31" long For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

This is a kingpin kit for Dubonnet style independent front suspension equipped cars. (with lever or knee action shocks) bushing OD 1.055" pin dia. 0.865" pin length ... For 1934 1935 1936 1937 1938 Chevrolet Cars

This is a seal kit that does 1 Dubbonet knee action shock. For 1934 1935 1936 1937 1938 Chevrolet Cars

This is a rebuild service for your stock Dubonnet style shock absorbers. This will let you keep your suspension all original. For 1934 1935 1936 1937 1938 Chevrolet Cars

This is a set of gas shocks for the front of JB and KB models with a beam axle. (sold in pairs) For 1939 1940 Chevrolet Cars

This is a set of 1949-54 car front shock absorbers. Attributes: Lower Mount : Stem 3/8" x 16 Shock Compressed Length : 8.5" Shock Dust Shield : No Shock Extended Len... For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

This is a left front shock for 1937-38 replacement for 1201A. This item contains a core charge of $100.00 included in the price. Once the exact same part is returned and rebui... For 1937 1938 Chevrolet Cars

This is a right front shock for 1937-38 replacement for 1201B. This item contains a core charge of $100.00 included in the price. Once the exact same part is returned and rebu... For 1937 1938 Chevrolet Cars

This is a left shock absorber for 1939-48 Fits 2200A models. This item contains a core charge of $150.00 included in the price. Once the exact same part is returned and rebuil... For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

This is a right shock absorber for 1939-48 Fits 2200B models. This item contains a core charge of $150.00 included in the price. Once the exact same part is returned and rebui... For 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

Shock Absorber Fluid. For All Chevrolet Cars and Trucks

This is a lower shock bracket for 1949-54. For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

BUSHING In Shock Arm (rubber)-double Action For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Cars and Trucks

This is a rubber shock link bushing for an I-beam axle. (2 pieces) For 1930 1931 1932 1933 1934 1935 1936 1937 1938 Chevrolet Cars

These are rubber bushings for the shock link on a double action shock. For 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Cars

Bushing (rubber) Front Shock Link W/ Brass Bushings, Pins and Cotter Keys, Beam Axle. Superior. For 1930 1931 1932 1933 1934 1935 1936 1937 1938 Chevrolet Cars

These are the 8 rubber bushings, 8 washers and 4 nuts for the shock absorbers. For 1949 1950 1951 1952 1953 1954 1955 1956 1957 Chevrolet Cars

This is a shock link that measures. 6-3/4 inches. Fits FC, GB and HB models with a beam axle. (1 side of link must be sized for tight fit) For 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Cars

This is a lower shock link for 1930-39 that measures 8 inches overall. Does not fit CC models. For 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 Chevrolet Cars

Leaf spring locator center bolt (except utility vehicle) (2 pieces). For All Chevrolet Cars and Trucks

This U-bolt with nuts,for the axle to spring. Bolts width inside 1-7/8 inches, 2-3/4 inches outer. length 4-1/2 inches inner (except EC and FC) For 1934 1935 1936 1937 1938 1939 1940 Chevrolet Cars

This is a shackle rebuild kit. Steel bushed with 4 pins, 4 bushings and 8 seals for the front or rear. For 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

These are rubber shackle seals for steel bushed shackles (8 pcs). For 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks

This is a roll of teflon liner for 2 leaf springs. 1-3/4" wide x. 20 feet long For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks

These are rubber sway bar bushings for sway bar links 8 washers and nuts except cars with straight axle For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

These sway bar bushings are for the Sway bar shaft straight axle use 2 sets (2 piece set) For 1939 1940 Chevrolet Cars

These are sway bar to frame rubber bushings at end of sway bar shaft on the axle that fits models JB and KB (2 pieces) For 1939 1940 Chevrolet Cars

These sway bar bushings are for the sway bar shaft except straight axle (2 pieces) For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

These sway bar bushings are for the sway bar shaft cars with staight axle use with #3501467 For 1939 1940 Chevrolet Cars

These are link kit for sway bar except cars with straight axle (2 pieces). For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars