This flush mount lens panel kit and the lens measures 12 inches. Has red single rectangular slotted lens with rounded ends. The lens measures 1/2 inch x 12 inch. To complete t... For All Cars and Trucks

This retaining ring is for non bed-roll applications. Use it for mounting the bed-roll LED to a flat panel. (taillight not included, shown for display purposes only) Check our... For All Cars and Trucks

Bed side hole caps with a red light in the middle of the hole cap. Includes red lens and a 12 volt light. The bulb is a type 194 miniature single filament bulb commonly used i... For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks

These hole caps are made of billet aluminum with a polished bezel. A clear lens protects the 12 volt 19 LED light inside. Amber for turn signals (single intensity). All lighte... For All Chevrolet Trucks

These hole caps are made of billet aluminum with a polished bezel. A clear lens protects the 12 volt 19 LED light inside. The Red lamp is dual intensity for applications combi... For All Chevrolet Trucks

Bed side hole caps with a red reflector in the middle of the hole cap. Similar reflectors were original on early GMC trucks and are available to fit GMC and Chevrolet stepside... For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 Chevrolet Trucks

These hole caps are made of billet aluminum with a polished bezel. A clear lens protects the 12 volt 19 LED light inside. White for backup lights (single intensity). All light... For All Chevrolet Trucks

These LED Super bright Red in color bulb 12 volt is a double contact base with equal height retaining pins. Minimal current draw because of LED technology. This LED bulb is us... For All Cars and Trucks

These LED Super bright bulb Red in color 12 volt is a double contact base with offset pins. Minimal current draw because of LED technology. This LED bulb is used in a 12 volt ... For All Cars and Trucks

This taillight is a Lokar brand and a large size of 3 inches x 6-1/2 inches. It's low profile and protrudes less than 3/16 of an inch outside of the body. Only requires 1-1/2 ... For All Cars and Trucks

This taillight is a Lokar brand with a standard size of 2-3/4 inches x 5-1/2 inches. It's low profile and protrudes less than 3/16 of an inch outside of the body. Only require... For All Cars and Trucks

These split bezel taillights feature a 3-3/4 inch deep steel housing with a 1-1/2 inch high X 6 inch wide billet aluminum face. Dual element bulb for brake, turn signal and ru... For All Cars and Trucks

These open bezel taillights feature a 3-3/4 inch deep steel housing with a 1-1/2 inch high X 6 inch wide billet aluminum face. Dual element bulb for brake, turn signal and run... For All Cars and Trucks

These all new taillights feature smooth styling in a clean and easy to install package. Billet aluminum bezels are precision machined from 6061-T6 aluminum and polished to per... For All Cars and Trucks

These all new taillights feature vintage ribbed styling in a clean and easy to install package. Billet aluminum bezels are precision machined from 6061-T6 aluminum and polishe... For All Cars and Trucks

This is a taillight assembly with red LED lights and a stainless steel housing. Includes the wiring pigtail. Made for a 1954. 12 volt only, will not work with a 6 volt system.... For 1955 1956 1957 1958 1959 Chevrolet Trucks

This is a flush mount LED replica of a 38-39 Ford teardrop style tail light. It's a complete tail lamp assembly with very bright and visible LEDs for the stop, tail, and turn ... For 1938 1939 Ford Cars and Trucks

This taillight is a complete flush mounted unit with a chrome rim and red LED light. It has turn signal,brake and running light capabilities. It measures 4-3/8 inches in diame... For All Pontiac Cars and Trucks

This taillight is a replica of a 1938-39 Ford teardrop style. It's a complete unit with housing, stainless rim and red LED light. For 12 volt only. Will not work on a 6 volt s... For 1938 1939 Ford Cars and Trucks

This is a complete flush mount unit with a chrome rim and a spider web style overlay. Bright red LED light. Turn signal, marker and brake light. 4-3/8 inch diameter X 1-3/4 in... For All Pontiac Cars and Trucks

This is a taillight assembly with red LED lights and a black housing. Includes the wiring pigtail. Made for a 1954. 12 volt only, will not work with a 6 volt system. Wiring de... For 1955 1956 1957 1958 1959 Chevrolet Trucks

This is replica of a 40 Ford "Chevron" style tail light (back side of flat mount light) 12 volt only, will not work with 6 volt. For All Ford Cars and Trucks

This is a taillight lens with red LED lights. Solid state circuit board. Will not fit into stock a housing. 12 volt only, will not work with a 6 volt system. For 1955 1956 1957 1958 1959 Chevrolet Trucks

Amber Dots Chrome with amber Bowtie cut out. For All Cars and Trucks

These are 'Blue Dot' glass lenses with a chrome ring that you install in your taillights. They give your car or truck a nostalgic look and have a purplish glow when lit up. St... For All Cars and Trucks

Blue Dots Chrome with blue Bowtie cut out. For All Chevrolet Cars and Trucks

A beautiful polished billet aluminum 3rd brake light. Elongated oval shape. Measures 7 inches wide x 1-3/4 inches tall x 1 inch deep. A perfect addition to any car. It makes y... For All Cars and Trucks

Tail light assembly including license light (except PNL and SUB) For 1931 1932 1933 1934 1935 1936 1937 1938 1939 Cars and Trucks

This is the gasket for taillight lens trim on a 1934-39. For 1934 1935 1936 1937 1938 1939 Chevrolet Trucks

This is a glass taillight lens for 1934-39. For 1934 1935 1936 1937 1938 1939 Chevrolet Trucks

This is a red glass taillight lens with a white outlined bowtie. For 1934 1935 1936 1937 1938 1939 Chevrolet Trucks

lens-tail light-w/chevrolet glass For 1931 1932 1933 1934 1935 Chevrolet Cars and Trucks

This is a tail light rim that is chrome with a bowtie center for 1934-39. The gasket for this rim is sold separately as part# 913824. For 1934 1935 1936 1937 1938 1939 Chevrolet Trucks

This is a complete taillight assembly unit. Originally for 1937-39 trucks.(except Panel and Suburban). The lens is glass with a Chevy bow tie and the housing is painted black.... For 1937 1938 1939 Chevrolet Trucks

This is a complete taillight assembly with a red lens that fits 1947-'53 Chevy Panel, Suburban or any street rod application. The housing comes primered. For turn signal and t... For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks

This is a complete left taillight assembly with a red lens that fits 1947-'53 Chevy Panel, Suburban or any street rod application. The housing comes in chrome. For turn signal... For 1947 1948 1949 1950 1951 1952 1953 Trucks

This is a complete taillight assembly with a red glass lens that fits 1947-'53 Chevy Panel and Suburban or any street rod application. The housing comes already primered. 12v ... For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks

This is a complete taillight assembly with a red glass lens that fits 1947-'53 Chevy Panel, Suburban or any street rod application. The housing comes in chrome. 12v For turn s... For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks

This is a complete taillight assembly with a clear lens and red LED's that fits 1947-'53 Chevy Panel, Suburban or any street rod application. The housing comes in chrome. For ... For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks

This is a complete taillight assembly with a clear lens and red LED's that fits 1947-'53 Chevy Panel, Suburban or any street rod application. The housing comes primered. For t... For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks

This is a complete taillight assembly with a red lens right side that fits 1947-'53 Chevy Panel, Suburban or any street rod application. The housing comes primered. For turn s... For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks

This is a complete taillight assembly with an amber glass lens that fits 1947-'53 Chevy Panel, Suburban or any street rod application. The housing comes primered. For turn sig... For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks

This is a complete taillight assembly with a clear lens and amber LED's that fits 1947-'53 Chevy Panel, Suburban or any street rod application. The housing comes in chrome. Fo... For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks

This is a complete taillight assembly with an amber lens that fits 1947-'53 Chevy Panel, Suburban or any street rod application. The housing comes chrome. For turn signal and ... For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks

This is a complete taillight assembly with a clear lens and amber LED's that fits 1947-'53 Chevy Panel, Suburban or any street rod application. The housing comes primered. For... For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks

This is a complete left taillight assembly with a red lens that fits 1947-'53 Chevy Panel, Suburban or any street rod application. The housing comes in chrome. For turn signal... For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks

Here's a replacement lens that's red in color. For a 3 inch LED tail light. Fits 1939-52 car or 1947-53 trucks. For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks

These are the round gaskets for 1947-53 taillights on Panel and Suburban (with the optional taillights). They measure 3 inches in diameter and include 2 pieces. For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks

This is the taillight rim or trim ring for a 1947-53 Panel and Suburban with the optional tail lights. Measures 3 inches in diameter. For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks

This is a glass taillight lens for 1947-53 Panel and Suburban with optional tail lights. It fits a 3 inch housing. For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks

This is a glass taillight lens with a 'Blue Dot' already installed for 1947-53 Panel and Suburban with the optional tail lights. For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks

These are the pads for the 1947-53 Panel and Suburban with the optional 3 inch round taillights. Includes 2 pads. For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks

This is a fiberglass taillight housing without an inner bucket. It measures 3 inches in diameter. Will need the rim cutout finished. Made to fit 1939 car and 1947-53 Panels an... For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 Chevrolet Cars and Trucks

Here's a replacement lens that's clear in color. For a 3 inch LED tail light. Fits 1939-52 car or 1947-53 trucks. For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks

Here's a replacement lens that's amber in color. For a 3 inch LED tail light. Fits 1939-52 car or 1947-53 trucks. For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks

This is for a 3 inch tail light. It's an LED with a built-in reflector and amber in color. Fits 1939-52 car or 1947-53 trucks. For 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks

This is a taillight assembly with a black housing for a 1954. Comes complete with the boot and pigtail. 12v Also available in stainless steel as part# 897711C. Wiring depends ... For 1954 Chevrolet Trucks

This is a taillight assembly with a stainless steel housing for a 1954. Comes complete with the boot and pigtail. 12v Wiring depends on which direction the socket is plugged i... For 1954 Chevrolet Trucks

This is the gasket for the taillight lens on a 1954. For 1954 Chevrolet Trucks

This is a plastic taillight lens with 'Guide' script for a 1954. For 1954 Chevrolet Trucks

This is a stainless steel rim or trim ring for the taillight on a 1954. For 1954 Chevrolet Trucks

This is a rubber boot for the tail light pigtail. It helps keep moisture out of your light housing. For 1954 1955 1956 1957 Chevrolet Trucks

This is a taillight pigtail with bulb contacts on the wires. For 1954 1955 1956 1957 Chevrolet Trucks

This gasket is for the license light lens on a Panel or Suburban with barn doors. For 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 Chevrolet Trucks

This is a gasket for the taillight lens on a Panel or Suburban with barn doors. The lens that goes with this gasket is sold separately as part# 5936907. For 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 Chevrolet Trucks

This is a taillight lens with a 'Blue Dot' installed for a Panel or Suburban with barn doors in the rear. For 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 Chevrolet Trucks

This is the pad for the taillight on a Panel or Suburban with a tailgate. Measures 4-1/2 inches round. For 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 Chevrolet Trucks

This is the rubber pad for the taillight on a Panel or Suburban with barn doors. For 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 Chevrolet Trucks

These are the rear contacts for taillights on the drivers side rear door of your Panel or Suburban. For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 Chevrolet Trucks

This is a right side taillight bracket like the original. Made of steel and painted black. For 1954 Chevrolet Trucks

This is a left side taillight bracket like the original. Made of steel and painted black. For 1954 Chevrolet Trucks

This is a stainless steel taillight bracket for the right side on a 1954. When you install these on your vehicle, rust is a thing of the past. For 1954 Chevrolet Trucks

This is a stainless steel taillight bracket for the left side on a 1954. When you install these on your vehicle, rust is a thing of the past. For 1954 Chevrolet Trucks

This is a left side taillight bracket like the original. Made of steel and chrome plated. For 1954 Chevrolet Trucks

This is a right side taillight bracket like the original. Made of steel and chrome plated. For 1954 Chevrolet Trucks

This is a left side taillight bracke like the original that also serves as a mount for your license plate. Made of steel and painted black. For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks

This is a right side taillight bracket like the original. Made of steel and painted black. For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks

This is a left side taillight bracket like the original. It also serves as a mount for your license plate. Made of steel and chrome plated. For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks

This is a right side taillight bracket like the original. Made of steel and chrome plated. For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks

This is a stainless steel combination taillight and license plate bracket for the left side on a 1947-53. When you install these on your vehicle, rust is a thing of the past. ... For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks

This is a stainless steel taillight bracket for the right side on a 1947-53. When you install these on your vehicle, rust is a thing of the past. The left side is sold separat... For 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks

This is a left side taillight bracket made like the original that also serves as a mount for your license plate. Made of steel and painted black. For 1934 1935 1936 1937 1938 1939 Chevrolet Trucks

This is a right side taillight bracket made like the original. Made of steel and painted black. For 1934 1935 1936 1937 1938 1939 Chevrolet Trucks

This is a right side taillight bracket like the original. Made of raw steel and unfinished. For 1940 1941 1942 1944 1945 1946 Chevrolet Trucks

This is a left side taillight bracket made like the original that also serves as a mount for your license plate. Made of raw steel and unfinished. For 1940 1941 1942 1944 1945 1946 Chevrolet Trucks

This is the gasket for the license light lens for 1940-53. The glass lens shown is sold separately as part# 920634. For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks

This is a license plastic light lens for 1940-53. The gasket shown is sold separately as part# 920808. For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks

These are the license light lens retainer clips and screws for 1940-53. Includes 2 clips and 2 screws. For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks

This is a glass license light lens for 1940-53. The gasket shown is sold separately as part# 920808. For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Trucks

This is for the perfectionist. The original style galvanized steel wire conduit for tail light. Measures 30 inches in length to give it a little extra. For 1931 1932 1933 1934 1935 1936 1937 1938 1939 Chevrolet Trucks

This is stainless steel wire conduit for the taillight wire. It measures 12 inches in length. Sold as a pair. For 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks

This is stainless steel wire conduit for the taillight wire. It measures 19 inches in length. Sold as a pair. For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 Chevrolet Trucks

These are for the perfectionist. Original style retainer to hold tail light conduit The conduit is sold separately as part# 1842812. For 1931 1932 1933 1934 1935 1936 1937 1938 1939 Chevrolet Trucks

Fits Panel/ Suburban w/ tailgate. 4-3/16in. O.D., round. (Shelf worn) For 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 Chevrolet Trucks

This is a headlight bucket stand made out of fiberglass it fits the right side. Reproduction of original. Will work on 1937-38 models, but is not correct. Handmade with three ... For 1937 1938 1939 1940 Chevrolet Trucks

This is a headlight bucket stand made out of fiberglass that fits the left side. Reproduction of original 39-40. Will work on 1937-38 models, but is not correct. Handmade with... For 1937 1938 1939 1940 Chevrolet Trucks

Attractive chrome bezel is approx. 9/16" dia. by 7/32" high when installed. Mount in 7/16" dia. hole. 12 vdc. with grounding terminal. Interior use only. Choose... For All Cars and Trucks