Brakes, Residual Valve 10 Lbs. Pressure

Inline residual pressure valves are required when using master cylinders without internal residual valves or in the drum brake circuit of a disc/drum system using a 4 wheel disc brake master cylinder. 10 psi valve used for drum brake systems only. 2 psi valve used can be used as an anti-siphon valve in a disc brake system. Install the residual pressure valve in the brake line as close to the mater cylinder as possible. The inlet end has a 1/8" pipe thread while the outlet is a 1/2"-20 thread and an inverted flare seat.

This part fits most Cars and Trucks.; exceptions may apply. Please read the complete description to see if this part fits your specific vehicle and application.