These are sill plate Stainless steel screws for aluminum and rubber sill plates. Complete for 2 Door For 1937 1938 1939 Chevrolet Cars

These are sill plate Stainless steel screws for aluminum and rubber sill plates. 2 door (specify year when ordering). For 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars

These are sill plates filler for gap between front and rear carpet at seat end they fit all Special Deluxe. 15-1/4" long, 2-9/16" wide For 1940 Chevrolet Cars

These are aluminum sill plates for convertible and hardtop includes fisher emblem and mounting screws. This item is oversized, extra shipping charges will apply. Note: Left si... For 1949 1950 1951 1952 Chevrolet Cars

These are aluminum sill plates for Aero Fleetline 2-door This item is oversized, extra shipping charges will apply. For 1942 1944 1945 1946 1947 1948 Chevrolet Cars

These are aluminum sill plates for Sedan Delivery For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

These are aluminum Sill Plates for 2-door (except Convertible, Hardtop and sedan delivery). Includes Fisher emblem and mounting screws. This item is oversized, extra shipping ... For 1949 1950 1951 1952 Chevrolet Cars

Sill Plates. Aluminum. FIts convertible For 1953 1954 Chevrolet Cars

These are aluminum sill plates for 2 doors (trim to fit). For 4 doors you'll need to order 2 pairs. 48" overall length This item is oversized, extra shipping charges will... For 1937 1938 1939 Chevrolet Cars

These are aluminum sill plates for 2-door except Convertible *NOTE* These parts come with a protective removable blue plastic film to help prevent scratches. This item is over... For 1953 1954 Chevrolet Cars

These are aluminum sill plates for Sedan Delivery, (2 pieces) For 1940 Chevrolet Cars

These are aluminum sill plates for 2-door except Aero and Cabriolet This item is oversized, extra shipping charges will apply. For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

These are aluminum sill plates for Cabriolet. This item is oversized, extra shipping charges will apply. For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

These are aluminum sill plates for Sedan Delivery. For 1953 1954 Chevrolet Cars

These are aluminum sill plates for Special Deluxe, Cabriolet, Coupe and 2-door (4 pieces) For 1940 Chevrolet Cars

These are aluminum sill plates for Fleetline 4-door For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

These are aluminum sill plates for 4-door (except Fleetline) length: front 31 7/8 inch rear 22 3/8 inch. For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

These are aluminum sill plates for Master 85, Deluxe, Coupe and 2-door This item is oversized, extra shipping charges will apply. For 1940 Chevrolet Cars

These are aluminum sill plates for Wagons only For 1946 1947 1948 Chevrolet Cars

These are the decorative aluminum sill plates for all four doors. For 1953 1954 Chevrolet Cars

These are aluminum sill plates for a 4-door and 4-door Wagon. For 1949 1950 1951 1952 Chevrolet Cars

These are aluminum sill plates for Master 85 and Deluxe 4-doors (4 pieces) For 1940 Chevrolet Cars

These are aluminum sill plates for Special Deluxe, 4-door (6 pieces) For 1940 Chevrolet Cars

These are aluminum sill plates for the Sedan Delivery For 1949 1950 1951 1952 Chevrolet Cars

This is a "Body by Fisher" sill plate emblem that are sold as a single. For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

These are the outer rubber sill plates for 1941-48. They have no metal backs and are trim to fit. For Fleetline 4-door. Fits front and rear. There's enough to do all 4 doors. For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

These are the outer rubber sill plates with metal back and screw holes for Sedan Delivery, Wagon, 4-door (except Fleetline) These are the rears on 4 door applications. For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

These are the outer rubber sill plates with metal back and screw holes for Sedan Delivery, Wagon, 4-door (except Fleetline) These are the fronts on 4 door applications. For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

These are the outer rubber sill plates with metal back and screw holes for 2-door except Aero. They measure 42 inches X 5 inches. For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

These are the outer rubber sill plates with metal back and screw holes for 2-door except Aero. They measure 42 inches X 5 inches. Made In USA! For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

These are the outer rubber sill plates for 1942-48 with a metal back for the Fleetline 2-door. For 1942 1944 1945 1946 1947 1948 Chevrolet Cars

This is a beaded rubber anti-squeak gasket between the running board to apron. Comes as a 10 foot length you cut to size. For 1933 1934 1935 1936 1937 1938 1939 Chevrolet Cars

Running board mats for smooth running boards. Rubber only. 59-1/8" long. Glue on. (Use glue part number 986199A ALL) Use # 986199A for bonding the rubber to metal. For 1937 1938 Chevrolet Cars

These are running board rubber mat originally on Master Special Deluxe. (this is the rubber mats only). Use # 986199A for bonding the rubber to metal. For 1940 Chevrolet Cars

Running board mats for smooth running boards. Rubber only. 62-1/2" long. Glue on. (Use glue part number 986199A ALL) Use # 986199A for bonding the rubber to metal. For 1939 Chevrolet Cars

These are superior quality reproduction running board mats with steel back and twist tabs. This item is oversized, extra shipping charges will apply. For 1937 1938 Chevrolet Cars

These are superior quality reproduction running board mats with steel back and twist tabs. This item is oversized, extra shipping charges will apply. For 1939 Chevrolet Cars

This complete mounting hardware kit for running board (bolt, nut and washers). For 1937 1938 1939 Chevrolet Cars

These are stainless steel running board replacement mouldings 77-3/4 inches long and 3/4 inch wide. Supplied with the attaching hardware. Not as original. This item is oversiz... For 1934 1935 1936 1937 1938 Chevrolet Cars

These are running board stainless steel mouldings that are 75-3/8 inches in length and 1/2" wide. (includes attaching clips). This item is oversized, extra shipping charg... For 1939 Chevrolet Cars

These are mouldings for the running board that are 68-3/8 inch long by 1 inch wide and come with the attaching clips. This item is oversized, extra shipping charges will apply... For 1940 Chevrolet Cars

These are clip / bolts for the running board moulding. For both sides. For 1934 1935 1936 1937 1938 Chevrolet Cars

These are clips / bolts for running board moulding that are 7/8 inch wide. For both sides. For 1940 Chevrolet Cars

These are clips for 1-1/4" wide running board mouldings (deluxe). For 1940 Chevrolet Cars

These are bolt / clips for the running board mouldings. There's 4 used per car. For 1939 Chevrolet Cars

These are bolts for running board mouldings. There's 4 used per car. For 1934 1935 1936 1937 1938 Chevrolet Cars

These are bolts for running boards mouldings. There's 4 used per car. For 1940 Chevrolet Cars

These are clips for the running board mouldings. They come 20 to a set and the car requires 20.. For 1939 Chevrolet Cars

These are clips / bolts for running board moulding 1 inch wide. For both sides. For 1940 Chevrolet Cars

These are clips / bolts for running board mouldings. For both sides. For 1939 Chevrolet Cars

These are clips / bolts for the running board moulding that are 1-1/4 inches wide. For both sides. For 1940 Chevrolet Cars

These are stainless steel rocker mouldings for 42-48. This item is oversized, extra shipping charges will apply. For 1942 1944 1945 1946 1947 1948 Chevrolet Cars

These are rocker mouldings for 1953-54. This item is oversized, extra shipping charges will apply. For 1953 1954 Chevrolet Cars

These are rocker mouldings for 49-52. This item is oversized, extra shipping charges will apply. For 1949 1950 1951 1952 Chevrolet Cars

This is a rocker moulding fastener kit for 1942-48 that includes the clips, bolts and screws for rocker moulding attachment. This set does both sides of the car. For 1942 1944 1945 1946 1947 1948 Chevrolet Cars

These are the long rocker moulding bolts for 1942-48. Requires 2 per car and sold in sets of 2. forward part of the rocker at fender cap. For 1942 1944 1945 1946 1947 1948 Chevrolet Cars

These are stainless steel screws for the rocker mouldings. (uses 2 per car and sold as a set of 2) For 1942 1944 1945 1946 1947 1948 Chevrolet Cars

These are the rocker moulding bolts for 1941. There's 6 required per car. Sold as a set. For 1941 Chevrolet Cars

These are the short rocker moulding bolts for 1942-48. Requires 8 per car and sold in sets of 8. For 1942 1944 1945 1946 1947 1948 Chevrolet Cars

These are the rocker moulding clips for 1942-48. There's 16 required per car and they are sold as a set. For 1942 1944 1945 1946 1947 1948 Chevrolet Cars

These are the rocker moulding fastener set clips and bolts that does 2 rockers. For 1941 Chevrolet Cars

These are the rocker moulding bolts for 1949-52. There's 4 per car and sold as a set. For 1949 1950 1951 1952 Chevrolet Cars

This is a rocker moulding fastener kit for 1953-55 that includes the clips and bolts for rocker moulding attachment. This set does both sides of the car. For 1953 1954 1955 Chevrolet Cars

This is a rocker moulding fastener kit for 1949-52 that includes the clips and bolts for rocker moulding attachment. This set does both sides of the car. For 1949 1950 1951 1952 Chevrolet Cars

This is the rubber pad with a hollow bead for the rare accessory foot scraper. Mounts to the body under the door fender extension. Sold by the foot. For 1942 1944 1945 1946 1947 1948 Chevrolet Cars

This is the rubber pad for the rare accessory foot scraper to the rocker panel. Includes 12 feet that needs cut to length. For 1941 Chevrolet Cars

These are the rubber blocks for the front of the rare accessory foot scraper. For 1941 Chevrolet Cars

These attach to the rocker panel and rocker mouldings fasten to the outer edge of foot scrapers. Made from aluminum. Attaching hardware and brackets are included. For 1941 Cars

This is the rubber plug in rocker panel. For 1953 1954 1955 1956 1957 Chevrolet Cars

This is an oval shaped rubber plug in the floorboard. For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Cars

This is a rubber plug for the rear of rocker in wheel well (2 pieces). For 1942 1944 1945 1946 1947 1948 Chevrolet Cars

This is a rubber plug for bottom of the rocker panels (4 pieces) For 1941 Chevrolet Cars

These smooth Fiberglass running boards with built-in mounting points 1/2 ton pickup Top surface of running board is completely smooth. While still matching the stock fenders. ... For 1937 1938 Chevrolet Trucks

These smooth Fiberglass running boards with built-in mounting points 1/2 ton pickup 2 inch wider than stock Top surface of running board is completely smooth. Widened at the r... For 1937 1938 Chevrolet Trucks

These stock pattern Fiberglass running boards with built-in mounting points fit 1/2 ton pickup Corematt (a thin fabric that adds stiffness and strength) is layered between the... For 1937 1938 Chevrolet Trucks

These smooth running boards with built in mounting points 16 gage cold rolled steel 1/2 ton truck. Splash apron may need to be notched or pressed into board to match properly.... For 1937 1938 Chevrolet Trucks

These smooth running boards with built in mounting points 16 gage cold rolled steel 1/2 ton truck are 2 inch wider. Splash apron may need to be notched or pressed into board t... For 1937 1938 Chevrolet Trucks

These smooth running boards with built in mounting points 16 gage cold rolled steel 1/2 ton truck. Splash apron may need to be notched or pressed into board to match properly.... For 1939 1940 Chevrolet Trucks

These smooth Fiberglass running boards with built-in mounting points 1/2 ton pickup Top surface of running board is completely smooth. While still matching the stock fenders. ... For 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks

These smooth Fiberglass running boards with built-in mounting points 1/2 ton pickup 2-1/2 inch wider than stock Top surface of running board is completely smooth. Widened at t... For 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks

These smooth running boards with built in mounting points 16 gage cold rolled steel 1/2 ton pickup 2 inch wider. Splash apron may need to be notched or pressed into board to m... For 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks

These ribbed running boards with built in mounting points are a steel super reproduction 1/2 ton pickup. This item is oversized, extra shipping charges will apply. For 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks

These are chromed steel ribbed running boards 1/2 ton. This item is oversized, extra shipping charges will apply. For 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks

These are the front running board brackets that measure 17 inches in length. For 1937 1938 1939 Chevrolet Cars

These are the rear running board brackets that measure 14-1/2 inches in length. For 1937 1938 1939 Chevrolet Cars

These are running boards made of smooth 16 gauge cold rolled steel. Sold as a pair. ***Vendor ships within 15 business days from order date*** For 1939 Chevrolet Cars

These are fiberglass running boards that are smooth. Sold as a pair. *NOTE* This item ships direct from manufacturer. Additional shipping charges apply. Please call for rates For 1937 1938 Chevrolet Cars

These are fiberglass running boards that are smooth. Sold as a pair. *NOTE* This item ships direct from manufacturer. Additional shipping charges apply. Please call for rates For 1939 Chevrolet Cars

These are fiberglass running boards that are stock appearing. Sold as a pair. *NOTE* This item ships direct from manufacturer. Additional shipping charges apply. Please call f... For 1939 Chevrolet Cars

These are fiberglass running boards that are stock appearing. Sold as a pair. *NOTE* This item ships direct from manufacturer. Additional shipping charges apply. Please call f... For 1937 1938 Chevrolet Cars

These are smooth fiberglass running boards that are 2 inches wider at the rear for 2 inch wider rear fenders. Sold as a pair. *NOTE* This item ships direct from manufacturer. ... For 1937 1938 Chevrolet Cars

These are smooth fiberglass running boards that are 2 inches wider at the rear for 2 inch wider rear fenders. Sold as a pair. *NOTE* This item ships direct from manufacturer. ... For 1939 Chevrolet Cars

These are running boards made of smooth 16 gauge cold rolled steel. These are 2 inches wider at the rear for 2 inch wider rear fenders. Sold as a pair. ***Vendor ships within ... For 1937 1938 Chevrolet Cars

These are running boards made of smooth 16 gauge cold rolled steel. These are 2 inches wider at the rear for 2 inch wider rear fenders. Sold as a pair. ***Vendor ships within ... For 1939 Chevrolet Cars

These smooth Fiberglass running boards with built-in mounting points 1/2 ton pickup Top surface of running board is completely smooth. While still matching the stock fenders. ... For 1939 1940 Chevrolet Trucks

These smooth Fiberglass running boards with built-in mounting points 1/2 ton pickup 2 inch wider than stock Top surface of running board is completely smooth. Widened at the r... For 1939 1940 Chevrolet Trucks

These smooth running boards with built in mounting points 16 gage cold rolled steel 1/2 ton truck are 2 inch wider. Splash apron may need to be notched or pressed into board t... For 1939 1940 Chevrolet Trucks

These are running boards made of smooth 16 gauge cold rolled steel. Sold as a pair. Includes running board brackets. ***Vendor ships within 15 business days from order date***... For 1940 Chevrolet Cars

These are running boards made of smooth 16 gauge cold rolled steel. These are 2 inches wider at the rear for 2 inch wider rear fenders. Sold as a pair. Includes running board ... For 1940 Chevrolet Cars

These are fiberglass running boards that are smooth. Sold as a pair. *NOTE* This item ships direct from manufacturer. Additional shipping charges apply. Please call for rates ... For 1940 Chevrolet Cars