This original chrome accessory comes with the attaching hardware and has the correct contour through the length of the ornament. These are a great compliment to your hood orna... For 1954 Chevrolet Cars

This is the chrome rear script / fender emblem "Bel Air" that comes with the retainers for installation. These Are Not Exactly Like Original, The Back Mounting Posts... For 1953 1954 Chevrolet Cars

This is the little top spear piece above the gravel shield. Made of stainless steel and the perfect finishing touch. For 1953 1954 Chevrolet Cars

These are polished stainless steel gravel shields for the front fenders that fit a 1953-54. They are sold in pairs. For 1953 1954 Chevrolet Cars

Finally!!! Rear fender gravel guards have been reproduced. Very nice high quality reproduction for the 2 door model cars only. Made of polished stainless steel. For 1953 1954 Chevrolet Cars

These are clips for the gravel shields on the rear fender of a 1953-54. The set includes 10 pieces and are of superior quality. For 1953 1954 Chevrolet Cars

This fasteners are designed to fit most mouldings from 1/2 inch up to 2 inch. This clip is designed to brake off in 1/16 inch increments to fit your desired width. The nut siz... For All Cars and Trucks

This is a inner fender brace for the outer skin of the lower front left fender. This is precision die-stamped from 18 gage steel. Made in the USA For 1953 1954 Chevrolet Cars

This is a inner fender brace for the outer skin of the lower front right fender. This is precision die-stamped from 18 gage steel. Made in the USA For 1953 1954 Chevrolet Cars

This complete gasket kit is for assembling front end . It also comes with the foam seal. Helps seal out the elements and prevent squeaking. For 1954 Chevrolet Cars

This U-channel foam seal fits on the inner fender to seal it to the frame. Also helps to prevent squeaks. Can be used in other locations as needed. For All Chevrolet Cars

This U-channel foam seal fits on the inner fender to seal it to the frame. Also helps to prevent squeaks. For 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 Chevrolet Cars

This fender welt measures 1/4 inches. x 1-3/16 inches. The product is sold by the foot. Cars use approximately 15 feet for the rear fenders. The welt provides a seal between t... For All Chevrolet Cars and Trucks

This fender welt has a chrome mylar finish and measures 1-1/4" x 3/16". The chrome makes an easy way to dress up your car to a higher standard. Easily add a little s... For All Chevrolet Cars and Trucks

Rubber Flat Washers. These work great to cushion fasteners and protect paint. They'll seal small openings and prevent squeaks. 200 pieces in 4 assorted sizes are included in t... For All Chevrolet Cars

This 12 volt clear light bulb are for fender marker lights with a single contact with a threaded base. Threaded base, 3 watt 12 volt Buy an extra bulb and have it ready for an... For All Cars and Trucks

Lighted Fender Guide With LED. Works 6V Or 12V , Chrome Housing With Green, Red, Blue Or Amber Inserts. Vintage Style Accessory For 1930's-1940's Cars and Trucks. Easy Install... For All Cars and Trucks

These are a pair illuminated fender guides that clamps to the wheel well of front fenders they are chrome plated with milky colored top and a clear lens, stainless fin 15.5'' ... For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks

These curb feelers are a "must have" accessory. They mount in minutes by clamping to the bottom of the fender and are a universal fit. Helps prevent wheel and fender... For All Chevrolet Cars and Trucks

These curb feelers are a "must have" accessory. They mount in minutes by clamping to the bottom of the fender and are a universal fit. Helps prevent wheel and fender... For All Chevrolet Cars and Trucks

This item is oversized, extra shipping charges will apply. limited quantities Available For 1953 1954 Cars

This is a reproduction stainless steel front fender moulding for the right side. For 1953 1954 Chevrolet Cars

Quarter Panel moulding Belair 4 Door Sedan Right Lower With Bolt fits 4 Door Sedan Only. 1069WD limited quantities Available For 1953 1954 Cars

This is a reproduction stainless steel front fender moulding for the left side. For 1953 1954 Chevrolet Cars

Quarter Panel moulding Belair 4 Door Sedan And Wagon Right Upper. Fits 1062-69WD Only limited quantities Available For 1953 1954 Cars

This item is oversized, extra shipping charges will apply. Limited quantities Available For 1953 1954 Cars

This item is oversized, extra shipping charges will apply. limited quantities Available For 1953 1954 Cars

This item is oversized, extra shipping charges will apply. Limited quantities Available For 1953 1954 Cars

Quarter Panel moulding Belair 4 Door Sedan And Wagon Left Upper. Fits 1062-69WD Only. limited quantities Available For 1953 1954 Cars

This 6 piece clip-bolt set is for one front fender moulding. Requires 2 sets to do both front fenders. The bolt size of these clips is 10-24 X 5/8 inch. For 1952 1953 1954 Chevrolet Cars

These are the rear fender and quarter panel clips for two quarter panels on 210 2-door Sedan, Hardtop, Convertible For 1953 1954 Chevrolet Cars

These are the rear fender and quarter panel clips for two quarter panels on Bel Air 2-door Sedan, Hardtop and Convertible For 1953 1954 Chevrolet Cars

These are the rear fender and quarter panel clips for two quarter panels on 210 4-door Sedan, 4-door Wagon For 1953 1954 Chevrolet Cars

These are the rear fender and quarter panel clips for two quarter panels on Bel Air 4-door, 4-door Wagon For 1953 1954 Chevrolet Cars

Mag Daddy Universal Max-Nut 1/4-20 - 3 pack This screw is designed to insert into a small hole 1/2 inch with the ability of holding 1000 pounds per fastener load depends on th... For All Cars and Trucks

This hat shaped washer kit includes 16 pieces. Some known uses: - Front moulding bolts. - 41 fender top ornaments. - Washboards on fenders. - Dash trim for below gauges and cl... For All Chevrolet Cars

These fender skirts are die stamped steel and a superb product! For 1953 1954 Chevrolet Cars

These polished stainless steel fender skirt mouldings are also known as 'Bloomers' Fender Skirt Trim. The kit comes with mounting hardware. These fit Bel Air and the 210 model... For 1953 1954 Chevrolet Cars

These are the retainers on the body of the car for the fender skirts. The kit includes 4 pieces. This set will take care of both fender skirts for you. For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

This is the rubber seal that seals the fender skirt to the rear fender. It also helps prevent paint scratching and squeaks or rattles. It comes in a 9 foot section, enough to ... For 1949 1950 1951 1952 1953 1954 Chevrolet Cars

These are the clips to attach the gravel shields on 2-door models For 1953 1954 Chevrolet Cars

These are the clips to attach the gravel shields on 4-door models. For 1953 1954 Chevrolet Cars