Don't see headers available for your vehicle on our site? Please call or email us for additional or custom application headers. Many direct fit headers are available. For All Cars and Trucks

These are Sanderson tube headers that fit a 1967-79 Camaro suspension clip with straight plug heads. They are designed to fit 1927 and up automobiles with small block Chevrole... For All Chevrolet Cars and Trucks

These are Sanderson tube headers that fit a 1967-79 Camaro suspension clip with angled plug heads. Designed for use with angle plug heads. It is a very tight fitting header us... For All Chevrolet Cars and Trucks

Sanderson Headers for small block Chevy with stock, rack and pinion or cross steer vehicles. Use with straight or angled plug heads. This 4 inch tall header speaks for itself.... For All Chevrolet Cars and Trucks

These are Sanderson tube headers for a 1970-92 Camaro front clip with straight or angle spark plugs. The left side (driver) angles back 15 degrees and the right side (passenge... For All Chevrolet Cars and Trucks

These are Sanderson tube headers that fit a 1967-79 Camaro suspension clip. This header was designed for the new General Motors high output engine with angle plugs and D-Port ... For All Chevrolet Cars and Trucks

These are Sanderson tube headers made for rack and pinion or cross steer vehicles including 1932-'48 cars and trucks; 1955-'63 Chevy cars; 1949-'54 Chevy and 1948-up Ford pick... For All Chevrolet Cars and Trucks

These are ceramic coated Sanderson tube headers for use with a 1970-92 Camaro front clip, Straight or Angled Plugs. This left side (driver) angles back 15 degrees and the righ... For All Chevrolet Cars and Trucks

These are ceramic coated Sanderson tube headers that fit a 1967-79 Camaro suspension clip with straight plug heads. They are designed to fit 1927 and up automobiles with small... For All Chevrolet Cars and Trucks

These ceramic coated Sanderson headers for a small block Chevy GM with stock, rack and pinion or cross steer vehicles. Use with straight or angled plug heads. This 4" tal... For All Chevrolet Cars and Trucks

These are cast iron Sanderson headers for a big block Chevy. For All Chevrolet Cars and Trucks

These are ceramic coated Sanderson tube headers that fit early street rod applications. This header is designed to fit 1927 and up automobiles with small block Chevrolet engin... For All Chevrolet Cars and Trucks

These are ceramic coated Sanderson tube headers made for rack and pinion or cross steer vehicles including 1932-'48 cars and trucks; 1955-'63 Chevy cars; 1949-'54 Chevy and 19... For All Chevrolet Cars and Trucks

These are ceramic coated cast iron Sanderson Headers for all popular small block Chevy heads including HO. They fit tight to the block, making it ideal for any chassis, withou... For All Chevrolet Cars and Trucks

These are ceramic coated, cast iron big block Chevy headers for use with D-port and anti-reversion technologies. Fits Model A's thru 1963 Chevrolet passenger cars. Comes with ... For All Chevrolet Cars and Trucks

These are cast iron Fenton Headers being reproduced under license from Fenton for all 1937-62 216ci, 235ci and 261ci engines. Wow! Comes with header flange and gaskets. **Some... For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars and Trucks

These are cast iron Fenton Headers being reproduced under license from Fenton for all GMC 228ci, 248ci, 270ci and 302ci engines. Wow! Comes with header flange and flange gaske... For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 GMC Cars and Trucks

This is the exhaust gasket from the header pipe to the Fenton headers (requires 2). For All Chevrolet Trucks

This is a bolt kit for Fenton Headers that includes the bolts and washers. For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars and Trucks

This is a heat kit. header to fenton intake, will also fit offenhauser intake. 216 cubic inch only. For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks

These are the best Chevy 6-cylinder headers on the market. Made of black painted steel. They fit 1937-62 216ci, 235ci and 261ci engines. The tubing is mandrel bent to provide ... For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars and Trucks

These are the best Chevy 6-cylinder headers on the market. Made of polished 304 stainless steel. They fit 1937-62 216ci, 235ci and 261ci engines. The tubing is mandrel bent to... For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars and Trucks

These "Heavy Duty" black painted steel tube headers fit 1942-up small block Chevy. Included is the gaskets and hardware. For All Chevrolet Cars and Trucks

This is an exhaust system for a 1941-1948, 1-1/2 Ton w/ 134-1/2 in. wheelbase. ***All exhaust systems are $295.00 to ship to the continental 48 US states*** For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Trucks

This is an exhaust system for a 1941-1948 3/4 ton pickup. ***All exhaust systems are $295.00 to ship to the continental 48 US states*** For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Trucks

This is an exhaust system for a 1941-1946 half ton pickup. ***All exhaust systems are $295.00 to ship to the continental 48 US states*** For 1941 1942 1944 1945 1946 Chevrolet Trucks

This is a set of intake and exhaust manifold clamps (spreaders). used in good condition originals For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 Chevrolet Cars and Trucks

This is a set of intake and exhaust manifold clamps (spreaders). Cast reproduction. For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 Chevrolet Cars and Trucks

This is the rectangle gasket that goes between the intake and exhaust manifolds. For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks

This is the intake and exhaust manifold gaskets for 216 engines (3 pieces). For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks

This is the anti-rattle heat riser spring for the exhaust manifold. For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks

This is the heat riser spring for the exhaust manifold. For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks

This is an oversize heat riser shaft for the exhaust manifold. This is oversize and requires reaming of the worn manifold holes to install. Using this part installed properly ... For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks

This is a flange plate that holds the header pipe to the header. For Fenton headers our part #3657963. For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 Chevrolet Cars and Trucks

This is a flange plate that holds the header pipe to the exhaust manifold for a 216 engine. For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 Chevrolet Cars and Trucks

This is a header pipe gasket to manifold that measures 2-3/8" OD. For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 Chevrolet Trucks

These are the studs in the manifold for the header pipe. They measure 3/8 inch x 2 inch w/ 5/16 inch long brass hex nuts. For 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Cars and Trucks

This spring supports the rear of the header pipe (except 1940-46 1 Ton and 1939-46 utility). For 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 Chevrolet Trucks

This is the header pipe for all 1941-48 trucks (except COE) Header pipe flange plate not included. Use our part # 593607 for the flange. This item is oversized, extra shipping... For 1941 1942 1944 1945 1946 1947 1948 Chevrolet Trucks

This is a muffler for 1941-1949. The muffler size and variety may differ from the picture shown. For 1941 1942 1944 1945 1946 1947 1948 1949 Chevrolet Trucks

This is a 1937-49 rear muffler clamp that is a 1-5/8 inch size. For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 Chevrolet Trucks

This is a 1937-49 front muffler clamp that is a 1-7/8 inch size. For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 Chevrolet Trucks

This is a muffler hanger for 1937-55. For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 Chevrolet Trucks

This is the tailpipe (from the muffler back) for a 1941-49. 1-1/2 Ton w/ 134-1/2 inch wheelbase and 1 Ton. This item is oversized, extra shipping charges will apply. For 1941 1942 1944 1945 1946 1947 1948 1949 Chevrolet Trucks

This is the tailpipe (from the muffler back) for a 1941-46 half ton pickup. This item is oversized, extra shipping charges will apply. For 1941 1942 1944 1945 1946 Chevrolet Trucks

This is the tailpipe (from the muffler back) for a 1941-49 3/4 ton pickup. This item is oversized, extra shipping charges will apply. For 1941 1942 1944 1945 1946 1947 1948 1949 Chevrolet Trucks

This is a replacement tailpipe hanger that's not correct for restoration but functions well. If you're restoring then you'll want our part # 3656791 instead, to be correct. For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks

This is a correctly reproduced tailpipe hanger. Works on Chevy and GMC For 1937 1938 1939 1940 1941 1942 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 Chevrolet Trucks

This clamp is original for the tailpipe extension and comes with a nut and bolt. For All Chevrolet Cars and Trucks

This is the tailpipe heat shield that's located under the bed. Heatshield for 1937-46 Chevrolet Truck. For 1937 1938 1939 1940 1941 1942 1944 1945 1946 Chevrolet Trucks

This is a polished stainless steel reproduction of an exhaust extension. For All Cars and Trucks

This is a stainless steel reproduction of an accessory exhaust extension with a stamped bowtie. For All Chevrolet Cars and Trucks

This is a chromed steel exhaust extension with a bowtie shaped outlet. It measures 2-1/4 inches inside diameter. For All Chevrolet Cars and Trucks

This is a stainless steel exhaust extension with a bowtie shaped outlet. It measures 2-1/4 inches inside diameter. For All Chevrolet Cars and Trucks

This is a superb reproduction of the original accessory bear claw shaped exhaust extension that also includes the fastener. For 1942 1944 1945 1946 1947 1948 Chevrolet Cars and Trucks

This paint is very high temperature with stainless steel pigments. Made for exhaust manifolds and pipes and gives a soft grey, metallic finish. For All Cars and Trucks

Paint-Cast Blast. Cast blast high temp 1200 degree. etc. 11 oz spray can. This is called 'Cast Blast'. It's grey in color and gives a fresh cast look for exhaust manifolds. Th... For All Cars and Trucks

This is clear paint made for very high temperatures. (1200 degree) Made for exhaust manifolds and pipes in a 11 oz spray can. For All Cars and Trucks

This is paint is made for very high temperatures. It's a natural looking flat aluminum color. Made for exhaust manifolds and pipes in a 11 oz spray can. For All Cars and Trucks

This is a driver's side chromed steel alternator bracket for a pre-1969 Chevy small block. Bolts onto the exhaust manifold / header bolts on the head. For All Chevrolet Cars and Trucks

This is a chromed steel alternator bracket for a pre-1969 Chevy small block with a short water pump. For All Chevrolet Cars and Trucks